Emerson E300 Series - Page 36

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
36 E300 Design Guide
Issue Number: 1
Figure 3-10 Surface mounting the size 4 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-4 for further information.
Figure 3-11 Surface mounting the size 5 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-4 for further information.
Æ 6.5 mm
(0.26 in) x 4 holes
106 mm (4.17 in)
375 mm
(14.76 in)
8mm
(0.32 in)
53 mm
(2.09 in)
53 mm
(2.09 in)
124 mm (4.88 in)
391 mm (15.39 in)
365 mm (14.37 in)
200 mm (7.87 in)
9mm
(0.35 in)
NOTE
106 mm (4.17 in)
9mm
(0.35 in)
8mm
(0.32 in)
375 mm (14.76 in)
143 mm (5.63 in)
391 mm (15.39 in)
365 mm (14.37 in)
202 mm (7.95 in)
Æ 7.0 mm (0.28 in)
NOTE