Emerson E300 Series - Page 37

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
E300 Design Guide 37
Issue Number: 1
Figure 3-12 Surface mounting the size 6 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-4 for further information.
Figure 3-13 Surface mounting the size 7 drive
376 mm
(14.80 in)
196.0 mm
(7.72 in)
6.0 mm
(0.24 in)
Æ7.0 mm
(0.27 in)
7.0 mm
(0.28 in)
227 mm (8.94 in)
210 mm (8.27 in)
389 mm
(15.32 in)
365 mm
14.37 in
NOTE
270 mm (10.63 in)
557 mm (21.93 in)
508 mm (20.0 in)
280 mm (11.02 in)
220 mm (8.66 in)
Æ 9mm (0.35 in)
538 mm (21.18)
25 mm
(0.98 in)
9.5 mm
(0.39 in)