Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
E300 Design Guide 413
Issue Number: 1
If Media Card Create Special File (N07) = 1 when a parameter file is transferred to an NV media card the file is created as a macro file. Media Card
Create Special File (N07) is reset to 0 after the file is created or the transfer fails.
Media Card File Type (N04) shows the type of non-volatile media card inserted in the drive.
Media Card Read-only Flag (N09) shows the state of the read-only flag for the currently installed card.
Media Card Warning Suppression Flag (N10) shows the state of the warning flag for the currently installed card.
The value of Media Card File Required Version (N11) is used as the version number for a file when it is created on an NV media card. Media Card File
Required Version (N11) is reset to 0 when the file is created or the transfer fails.
N07 Media Card Create Special File
Mode Open-Loop, RFC-A, RFC-S
Minimum 0 Maximum 1
Default 0 Units
Type 8 Bit Volatile Update Rate Background read
Display Format Standard Decimal Places 0
Coding RW, NC
N08 Media Card Type
Mode Open-Loop, RFC-A, RFC-S
Minimum 0 Maximum 2
Default Units
Type 8 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, Txt, ND, NC, PT
Value Text Description
0 None No media card has been inserted
1 SMARTCARD A SMARTCARD has been inserted
2 SD Card A FAT formatted SD card has been inserted
N09 Media Card Read-only Flag
Mode Open-Loop, RFC-A, RFC-S
Minimum 0 Maximum 1
Default Units
Type 1 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
N10 Media Card Warning Suppression Flag
Mode Open-Loop, RFC-A, RFC-S
Minimum 0 Maximum 1
Default Units
Type 1 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
N11 Media Card File Required Version
Mode Open-Loop, RFC-A, RFC-S
Minimum 0 Maximum 9999
Default Units
Type 16 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RW, ND, NC, PT
To Next Page
Loading...
