Endress+Hauser Cubemass DCI - Operating Options; Operating Program Fieldcare; Device Description Files for Operating Programs

Cubemass DCI MODBUS RS485 Operation
Endress+Hauser 43
5.5 Operating options
5.5.1 Operating program "FieldCare"
FieldCare is Endress+Hauser’s FDT-based plant asset management tool and allows the configuration
and diagnosis of intelligent field devices. By using status information, you also have a simple but
effective tool for monitoring devices. The Proline flowmeters are accessed via a service interface or
via the service interface FXA193.
5.5.2 Device description files for operating programs
Operation:
!
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the FieldCare software package, test results can be imported into a database,
printed out and used for official certification. Contact your Endress+Hauser representative for more
information.
Operating program/Device driver: How to acquire:
FieldCare/ DTM • www.endress.com (È Download È Software È Driver)
• CD-ROM (Endress+Hauser order number: 56004088)
Tester and simulator: How to acquire:
Fieldcheck • Update by means of FieldCare via flow device FXA193/291 DTM in
Fieldflash module