Accessories Cubemass DCI MODBUS RS485
66 Endress+Hauser
8Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor. Detailed information on the order code in question can be obtained from
your Endress+Hauser representative.
8.1 Measuring principle-specific accessories
8.2 Service-specific accessories
Accessory Description Order code
Mounting set for
transmitter
Mounting set for wall-mount housing (remote version).
Suitable for:
– Wall mounting
– Pipe mounting
– Installation in control panel
Mounting set for aluminum field housing:
Suitable for pipe mounting (¾" to 3")
DK8WM - *
Mounting set for
the Cubemass DCI
sensor
Mounting set for Cubemass DCI, comprising:
– 2 process connections
–Seals
DK8CS - ****
Mounting plate for
the Cubemass DCI
sensor
Mounting plate for Cubemass DCI, comprising:
– mounting plate
–4 × M5
DK8CS - ****
Accessory Description Order code
Applicator Software for selecting and configuring flowmeters.
Applicator can be downloaded from the Internet or ordered on
CD-ROM for installation on a local PC.
Contact your Endress +Hauser representative for more
information.
DXA80 - *
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the
"FieldCare" software package, test results can be imported into a
database, printed out and used for official certification.
Contact your Endress +Hauser representative for more
information.
50098801
FieldCare FieldCare is Endress+Hauser’s FDT-based plant asset
management tool and allows the configuration and diagnosis of
intelligent field devices. By using status information, you also
have a simple but effective tool for monitoring devices. The
Proline flowmeters are accessed via a service interface or via the
service interface FXA193.
È Product page on the
Endress+Hauser website:
www.endress.com
FXA193 Service interface from the measuring device to the PC for
operation via FieldCare.
FXA193 – *
To Next Page
Loading...
