Endress+Hauser Cubemass DCI - 10.1.10 Mechanical Construction

Technical data Cubemass DCI MODBUS RS485
92 Endress+Hauser
10.1.10 Mechanical construction
Design / dimensions The dimensions and lengths of the sensor and transmitter are provided in the separate "Technical
Information" document on the measuring device in question. This can be downloaded as a PDF file
from www.endress.com. A list of the "Technical Information" documents available is provided in
the "Documentation" section → ä 94.
Weight
Material
Transmitter housing
•Compact version
– Aluminum housing: powder-coated die-cast aluminum
• Remote version
– Wall-mount housing: powder coated die-cast aluminum
– Field housing: powder-coated die-cast aluminum
Sensor connection housing (remote version)
• Powder-coated die-cast aluminum
Sensor housing / secondary containment
• Acid-resistant and alkali-resistant external surface, stainless steel 1.4301/304
Process connections
Measuring tube
• 1.4539/904L
Seals for mounting set
•Viton
•EPDM
• Silicone
•Kalrez
Material load diagram The material load diagrams (pressure-temperature diagrams) for the process connections are
provided in the separate "Technical Information" document on the measuring device in question.
This can be downloaded as a PDF file from www.endress.com. A list of the "Technical Information"
documents available is provided in the "Documentation" section → ä 94.
Process connections → ä 92, process connections
Compact version Remote version
[kg] [lb] [kg] [lb]
5.5 12.1 3.3 7.3
Process connections Material
Mounting set for flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 Stainless steel 1.4539/904L
Loose flanges Stainless steel 1.4404/316L
VCO coupling Stainless steel 1.4539/904L
Mounting set for NPT-F (¼", ½") Stainless steel 1.4539/904L