Proline Promass 83 PROFIBUS DP/PA Operation
Endress+Hauser 49
5.5.4 Device description data for operating programs
The following section illustrates the suitable device description file for the operating tool in question
and then indicates where these can be obtained.
PROFIBUS DP
!
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the “ToF Tool – Fieldtool Package” software package, test results can be imported
into a database, printed and used for official certification. Contact your Endress+Hauser
representative for more information.
Valid for device software: 3.00.XX → Function “DEVICE SOFTWARE”
Device data PROFIBUS DP (RS485)
Profile Version:
Promass 83 ID-No.:
Profile ID-No.:
3.0
1529hex
9742hex
→ Function “PROFIL VERSION”
→ Function “DEVICE ID”
GSD information:
Promass 83 GSD file:
Profile GSD file:
Bitmaps:
Extended format:
Standard format:
PA139742.gsd
EH_1529_d.bmp/.dib
EH_1529_n.bmp/.dib
EH_1529_s.bmp/.dib
eh3x1529.gsd
eh3_1529.gsd
Software release: 03.2005
Operating program/device driver: Sources for obtaining device descriptions/program updates:
Promass 83 GSD file • www.endress.com (→ Download → Software → Driver)
• www.profibus.com
• CD–ROM (Endress+Hauser order number: 56003894)
Fieldcare / DTM • www.endress.com (→ Download → Software → Driver)
• CD–ROM (Endress+Hauser order number: 56004088)
SIMATIC PDM • www.endress.com (→ Download → Software → Driver)
• www.feldgeraete.de
ToF Tool - Fieldtool Package (operation via
service protocol)
• www.tof-fieldtool.endress.com
• Update CD-ROM (Endress+Hauser order number: 50099820)
Tester/simulator:
Device: How to acquire:
Fieldcheck • Update by means of ToF Tool - Fieldtool Package via Fieldflash
To Next Page
Loading...
