Endress+Hauser Proline Promass 83 - Block BASIC FUNCTION

Operation Proline Promass 83 PROFIBUS DP/PA
48 Endress+Hauser
5.5 Operating options
5.5.1 Fieldcare
Fieldcare is Endress+Hauser’s FDT-based plant asset management tool and allows the configuration
and diagnosis of intelligent field devices. By using status information, you also have a simple but
effective tool for monitoring devices.
5.5.2 Operating program “ToF Tool – Fieldtool Package”
Modular software package consisting of the service program “ToF Tool” for configuration and
diagnosis of ToF level measuring devices (time-of-flight measurement) and evolution of pressure
measuring instruments as well as the “Fieldtool” service program for the configuration and diagnosis
of Proline flowmeters. The Proline flowmeters are accessed via a service interface or via the service
interface FXA 193.
Contents of the “ToF Tool – Fieldtool Package”:
• Commissioning, maintenance analysis
• Configuring flowmeters
•Service functions
• Visualisation of process data
• Trouble-shooting
• Controlling the “Fieldcheck” tester/simulator”
5.5.3 Operating program “SIMATIC PDM” (Siemens)
SIMATIC PDM is a standardised, manufacturer-independent tool for the operation, configuration,
maintenance and diagnosis of intelligent field devices.