Proline Promass 83 PROFIBUS DP/PA Technical data
Endress+Hauser 169
Promass M:
• DN 8...50: titanium grade
• DN 80: titanium grade 2
Promass M (high pressure version):
• Titanium grade 9
Promass E:
• Stainless steel 1.4539/904L
Promass A:
• Stainless steel 1.4539/904L, Alloy C-22 2.4602/N 06022
Promass H:
• Zirconium 702/R 60702
Promass I:
• Titanium grade 9
Seals:
Promass F, E, H, I:
Welded process connections without internal seals
Promass M:
Viton, EPDM, silicon, Kalrez, FEP sheathing (not for gas applications)
Promass A:
Viton, EPDM, silicon, Kalrez
Material load diagram The material load diagrams (pressure-temperature diagrams) for the process connections are to be
found in the following documents:
• Technical Information Promass 80/83 F, M (TI 053D/06/en)
• Technical Information Promass 80/83 E (TI 061D/06/en)
• Technical Information Promass 80/83 A (TI 054D/06/en)
• Technical Information Promass 80/83 H, I (TI 052D/06/en)
Process connections see Page 167 ff.
10.1.11 Human interface
Display elements • Liquid crystal display: illuminated, four lines with 16 characters per line
• Selectable display of different measured values and status variables
• 3 totalizers
• At ambient temperatures below –20 °C the readability of the display may be impaired.
Operating elements • Local operation with three optical sensors (–, +, E)
• Application specific Quick Setup menus for straightforward commissioning
Language groups Language groups available for operation in different countries:
To Next Page
Loading...
