Endress+Hauser Proline Promass 83 - Page 168

Technical data Proline Promass 83 PROFIBUS DP/PA
168 Endress+Hauser
Promass M:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 * stainless steel 1.4404/316L,
titanium grade 2
• Flange DIN 11864-2 Form A (flat flange) * stainless steel 1.4404/316L
• PVDF connection to DIN / ANSI / JIS
• Hygienic coupling DIN 11851 / SMS 1145 * stainless steel 1.4404/316L
• Couplings ISO 2853 / DIN 11864-1 * stainless steel 1.4404/316L
• TriClamp (OD-tubes)* stainless steel 1.4404/316L
Promass M (high pressure version):
• Connector * stainless steel 1.4404/316L
• Couplings * stainless steel 1.4401/316
Promass E:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 * stainless steel 1.4404/316L
• Flange DIN 11864-2 Form A (flat flange) * stainless steel 1.4404/316L
• VCO connection * Stainless steel 1.4404/316L
• Hygienic coupling DIN 11851 / SMS 1145 * stainless steel 1.4404/316L
• Couplings ISO 2853 / DIN 11864-1 * stainless steel 1.4404/316L
• TriClamp (OD-tubes)* stainless steel 1.4404/316L
Promass A:
• Mounting set for flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 → stainless steel
1.4539/904L, Alloy C-22 2.4602/N 06022.
Loose flanges → stainless steel 1.4404/316L
• VCO coupling * stainless steel 1.4539/904L, Alloy C-22 2.4602/N 06022
• Tri–Clamp (OD–tubes) (1/2") * stainless steel 1.4539/904L
• Mounting set for SWAGELOK (1/4", 1/8") * stainless steel 1.4401/316
• Mounting set for
NPT–F (1/4") → stainless steel 1.4539/904L1.4539/904L,
Alloy C-22 2.4602/N 06022
Promass H:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 * stainless steel 1.4301/304, parts in
contact with medium: zirconium 702
Promass I:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 * stainless steel 1.4301/304, parts in
contact with medium: titanium grade 9
• Flange DIN 11864-2 Form A (flat flange) * titanium grade 2
• Hygienic coupling DIN 11851 / SMS 1145 * titanium grade 2
• Couplings ISO 2853 / DIN 11864-1 * titanium grade 2
• Tri–Clamp (OD–tubes) * titanium grade 2
Measuring tube(s):
Promass F:
• DN 8...100: stainless steel 1.4539 (904L)
• DN 150: stainless steel 1.4404/316L
• DN 250: stainless steel 1.4404/316L; manifold: CF3M
• DN 8...150: Alloy C-22 2.4602/N 06022
Promass F (high-temperature version):
• DN 25, 50, 80: Alloy C-22 2.4602/N 06022