Epilog Laser LEGEND 24EX 6000 User Manual

Appendix C
Printing From AutoCAD
218
Once your drawing is ready to print, click on File | Plot.
Select the Legend driver
for your Plotter
Configuration
Insure your pens are set to
0.001 inch. See
“Printing from
AutoCAD 14…” above
for more information on
setting pens widths.
Click on Properties to
access the Legend
custom print driver.
The following window
appears.
Then click on the
“Custom Properties”
box to access the print
driver
.

Epilog Laser LEGEND 24EX 6000 Specifications

General

Brand	Epilog Laser
Model	LEGEND 24EX 6000
Category	Engraver
Language	English