Epson AcuLaser C2800 - Page 202

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 202
Confidential
PLATE LATCH
SPRING LATCH
LATCH FRONT
Confirm if the PLATE LATCH moves smoothly by pressing the BUTTON TOP.
1. Remove the SPRING LATCH from the tabs of the PLATE LATCH and the COVER FRONT ASSY.
Install the SPRING LATCH as shown in figure-A.
2. Remove the screws (silver, brimmed, self-tapping, 10 mm) that secure the two LATCH FRONTs to
the COVER FRONT ASSY.
3. Slide the PLATE LATCH and the LATCH FRONT in the direction of the arrow, and remove them
from the COVER FRONT ASSY.
NEXT>>
C
Kmy03011EB
1)
2)
2)
3)
Figure-A
SPRING LATCH
4. Hold down the tabs to release the LATCH FRONTs, and remove the LATCH FRONTs from the
PLATE LATCH.
Kmy03012EB
4)-2
4)-2
4)-1
4)-1
LATCH FRONT
LATCH FRONT
PLATE LATCH