Epson AcuLaser C2800 - Page 201

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 201
Confidential
7. Open the COVER ASSY MSI.
Be careful not to drop or damage the COVER ASSY FRONT.
8. Release the two tabs of the SHAFT PIVOTs on both sides of the COVER ASSY FRONT, hold the
COVER ASSY FRONT, and pull the SHAFT PIVOTs outward to remove the COVER ASSY
FRONT from the LINK L and the LINK R.
9. Release the two tabs of the SHAFT PIVOT MSIs that secure the COVER ASSY FRONT and the
COVER ASSY MSI to the main unit, and pull out the SHAFT PIVOT MSIs inward.
10. Remove the COVER ASSY FRONT together with the COVER ASSY MSI.
11. Remove the COVER ASSY MSI from the COVER ASSY FRONT.
Kmy03010EB
9)-2
8)-2
8)-2
8)-3
8)-3
7)
10)
9)-1
8)-1
8)-1
9)-2
9)-1
COVER ASSY
FRONT
CONTROL PANEL
 Be careful not to drop or damage the CONTROL PANEL.
 Be sure not to remove the CONTROL PANEL from the COVER FRONT ASSY too far
as they are connected with a harness.
1. Release the two tabs on the CONTROL PANEL, and remove the CONTROL PANEL from the
COVER FRONT ASSY.
2. Disconnect the CONTROL PANEL connector (CN1) and the HARNESS ASSY-CON F terminal.
C
Kmy03013E
A
1)-1
1)-1
1)-2
2)
CONTROL PANEL