Epson AcuLaser C2800 - Page 264

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 264
Confidential
CLUTCH ASSY PH TURN
1. Loosen the two clamps that secure the harness of the CLUTCH ASSY PH TURN, and detach the
harness.
2. Remove the E-ring that secures the CLUTCH ASSY PH TURN to the FEEDER ASSY.
3. Remove the CLUTCH ASSY PH TURN from the FEEDER ASSY.
B
A
C
Kmy03215E
A
2)
3)
1)
1)
CLUTCH ASSY PH TURN
ROLL ASSY TURN
1. Remove the E-ring that secures the shaft of the ROLL ASSY TURN.
2. Remove the BEARING REGI (white) that secures the ROLL ASSY TURN.
3. Remove the BEARING REGI (black) that secures the ROLL ASSY TURN.
Install the white BEARING on the right and the black BEARING on the left as shown in the
figure.
4. Temporarily slide the ROLL ASSY TURN toward left, pull out the right end of the ROLL ASSY
TURN from the CHUTE REGI, and remove the ROLL ASSY TURN.
B
A
C
Kmy03218EA
1)
4)
2) (White)
3) (Black)
ROLL ASSY TURN