Epson AcuLaser C2800 - Page 286

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 286
Confidential
z
HARNESS ASSY INTERLOCK
1. Disconnect the connector (P/J44) of the HARNESS ASSY INTERLOCK on the LVPS.
2. Loosen the clamp attached to the SHIELD LVPS that secures the harness of the HARNESS ASSY
INTERLOCK.
3. Release the harness of the HARNESS ASSY INTERLOCK from the DUCT DRV MAIN.
4. Remove the screw (silver, self-tapping, 16 mm) that secures the HARNESS ASSY INTERLOCK to
the main unit.
5. Remove the HARNESS ASSY INTERLOCK from the main unit.
A
D
Kmy03064E
A
2)-1
2)-1
2)-2
1)
3)
4)
5)
HARNESS ASSY INTERLOCK