Epson AcuLaser C2800 - Page 288

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 288
Confidential
9. Remove the six screws (silver, self-tapping, 10 mm) that secure the DRIVE ASSY MAIN to the main
unit.
10. Remove the DRIVE ASSY MAIN from the main unit.
Kmy03059E
A
10)
9)
9)
9)
9)
9)
9)
DRIVE ASSY MAIN
SENSOR ASSY CRU (K)
1. Remove the screw (silver, self-tapping, 10 mm) that secures the SENSOR ASSY CRU (K) to the
main unit.
2. Remove the SENSOR ASSY CRU (K) from the main unit.
3. Disconnect the connector (P/J193) on the SENSOR ASSY CRU (K).
A
D
Kmy03035E
A
1)
2)
3)
SENSOR ASSY CRU (K)