Epson AcuLaser C2800 - Page 333

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 333
Confidential
FAN MAIN
1. Disconnect the connector (P/J503) of the FAN MAIN on the LVPS.
2. Loosen the clamp that secures the harness of the FAN MAIN, and detach the harness.
3. Release the harness of the FAN MAIN from the tab on the main unit.
4. Remove the two screws (silver, self-tapping, 35 mm) that secure both the DUCT FAN MAIN and the
FAN MAIN.
5. Remove the DUCT FAN MAIN together with the FAN MAIN.
6. Remove the two screws (silver, self-tapping, 35 mm) that secure FAN MAIN to the DUCT FAN
MAIN.
7. Remove the FAN MAIN from the DUCT FAN MAIN.
 Mind the correct orientation when installing the FAN MAIN. The label on the FAN
MAIN should be facing front.
 Pass the harness of the FAN MAIN through the cutout of the DUCT FAN MAIN.
B
Kmy03067EC
1)
2)
5)
LABEL
6)
6)
7)
2)
3)
4)
4)
FAN MAIN