Epson AcuLaser C2800 - Page 373

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 373
Confidential
CLUTCH ASSY FEED OPT
1. Disconnect the connector (P/J4213) on the harness of the CLUTCH ASSY FEED OPT.
2. Loosen the clamp that secures the harness of the CLUTCH ASSY FEED OPT, and remove the
harness.
3. Remove the KL-ring that secures the CLUTCH ASSY FEED OPT to the SHAFT FEED OPT.
4. Remove the CLUTCH ASSY FEED OPT from the SHAFT FEED OPT.
A
B
Kmy03234E
A
1) (J4213)
2)
3)
4)
CLUTCH ASSY FEED OPT
DRIVE ASSY OPT FDR
1. Disconnect the connectors (P/J4221 and P/J4222) connected to the DRIVE ASSY OPT FDR.
2. Loosen the clamp on the DRIVE ASSY OPT FDR and remove the harness that is connected to the
DRIVE ASSY OPT FDR.
3. Remove the five screws (silver, 6 mm) that secure the DRIVE ASSY OPT FDR to the FRAME
ASSY OPT.
4. Remove the DRIVE ASSY OPT FDR from the FRAME ASSY OPT.
Make sure that the positioning frame located in the front and in the rear of the DRIVE
ASSY OPT FDR is securely inserted into the square hole of the FRAME ASSY OPT.
A
Kmy03238EB
2)
3)
3)
3)
3)
3)
1) (J4222)
1) (J4221)
DRIVE ASSY OPT FDR