Epson AcuLaser C2800 - Page 97

AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Engine-related Trouble FIP 97
Confidential
FIP 1-11 Paper Jam A D
 Possible parts that caused the error
 Troubleshooting
FIP 1-12 Paper Jam A B
 Possible parts that caused the error
 Troubleshooting
 REGI SENSOR  PWBA MCU
Step Check Yes No
1
Check the REGI SENSOR
Is there any foreign material or paper dust on
the REGI SENSOR?
Remove the
foreign material
or paper dust.
Go to Step [2].
2
Check the operation of the REGI SENSOR
Check the REGI SENSOR with reference to
FIP 2-1 (p.121).
--- ---
 FUSER UNIT  PWBA MCU
Step Check Yes No
1
Check the Exit Sensor part in the FUSER
UNIT
Is there any foreign material or paper dust on
the Exit Sensor part in the FUSER UNIT?
Remove the
foreign material
or paper dust.
Go to Step [2].
2
Check the operation of the Exit Sensor in the
FUSER UNIT
Check the Exit Sensor in the FUSER UNIT with
reference to FIP 2-11 (p.126).
--- ---