148
UsingthePrinterSoftwarewithMacintosh
Using the Reserve Job Function
The Reserve Job function allows you to store print jobs in the
printer’s Hard Disk Drive and to print them later directly from
the printer’s control panel. Follow the instructions in this section
to use the Reserve Job function.
9. Automatically change to
monochrome mode check
box:
Select this check box to have the
printer driver analyze the
printing data, and automatically
switch to monochrome mode if
the printing data is black and
white.
10. Add Coated to the Paper
Type settings check box:
When you select this check box,
Coatedappears in thePaperType
list on the Basic Settings dialog
box and become available.
11. Adjust line thickness
check box:
Adjusts the width of the lines
printed.
12. Default button: Returns to initials settings.
13. Select button: Selects spool file saving folder.
14. Cancel button: Clicking this button exits the
dialog box or printer driver
without saving your settings.
15. OK button: Clicking this button saves your
settings and exit the dialog box or
printer driver. The settings are
effectiveuntilyoumakenew
settings and click OK again.
To Next Page
Loading...
