Epson AcuLaser C8600 - The Message; On the LCD Panel

314
Troubleshooting
Themessage
Duplex Men Overflow
appearsonthe
LCD panel
The message
Image Optimum
appears on the LCD
panel
The message
Mem Overflow
appears on the LCD
panel
Cause What to do
There is not enough memory
for duplex printing. The
printer prints only on the top
side and ejects the paper.
If
Auto Cont
is set to
Off
in the Setup
Menu, press the Start/Stop button.
If
Auto Cont
is set to
On
in the Setup
Menu, the error is automatically
corrected after a certain period of time.
Cause What to do
The printer has insufficient
memory to print the page at
the specified print quality.
The printer automatically reduces the
print quality so that it can continue
printing. If the quality of the printout is
not acceptable, try simplifying the page
by limiting the number of graphics or
reducing the number and size of fonts.
Lower the resolution setting to 300 dpi.
Cause What to do
The printer has insufficient
memory to execute the current
task.
To correct the error, press the
Start/Stop button on the control panel.