34
Paper Handling
c
Caution:
The following paper cannot be used with the face-down tray. Use
the face-up tray instead.
❏ Plain paper smaller than 210 × 182 mm, such as A5 or
Half-Letter size
❏ EPSON Color Laser Transparencies
❏ Envelopes
❏ Thick paper
❏ Labels
How to select an output tray and optional lower
cassette
There are two ways of specifying which output tray you want to
use, the face-down tray or the face-up tray.
Using the printer driver:
Click the Basic Settings tab and select either Face-down Tray or
Face-up Tray from the Output Tray setting. Then click OK.
Using the control panel:
Select
Face-down
(face-downtray)or
Face-up
(face-uptray)asthe
Out Bin
setting in the Setup Menu.
Loading Paper
This section describes how to load paper into the MPtray, and the
standard and optional lower cassettes. If you use special media
such as EPSON Color Laser Transparencies or envelopes,see also
“Printing on Special Media” on page 42.
To Next Page
Loading...
