316
Troubleshooting
Paper handling problems
Paper does not feed from the proper paper source
Status and Error Messages
This section contains a list of error messages shown on the LCD
panel, giving a brief description of each message and suggestions
for correcting the problem. Note that not every message shown
on the LCD panel indicates a problem.
Cause What to do
The paper source setting may
not be correct.
Make sure that you have selected the
correct paper source in your
application.
There may be no paper in the
cassette or MP tray.
Load paper.
Too many sheets may be
loaded in a cassette or MP tray.
Make sure that you have not tried to
load too many sheets of paper. For the
maximum paper capacity for each
paper source, see “MP tray” on page 26.
If paper does not feed from the
optional Large Capacity Paper
Unit, the unit may not be
installed properly.
For instructions on installing the unit,
see“Installing theLarge CapacityPaper
Unit” on page 212.
To Next Page
Loading...
