190
Functions of the Control Panel
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If
Maximum
is selected, more memory is
allocated for receiving data. If
Minimum
is selected, more memory
is allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in “Reset Menu” on page 188.
❏ Resetting the printer erases all print jobs. Make sure the Ready light
is not flashing when you reset the printer.
USB Menu
These settings control communication between the printer and
the computer when using the USB interface.
USB I/F
Allows you to activate or deactivate the USB interface.
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If
Maximum
is selected, more memory is
allocated for receiving data. If set to
Minimum
is selected, more
memory is allocated for printing data.
Item Settings (default in bold)
USB I/F On, Off
Buffer Size Normal, Maximum, Minimum
To Next Page
Loading...
