Setting Up Your Printer on a Network
125
4
4
4
4
4
4
4
4
4
4
4
4
❏
If the printer driver is installed in the client beforehand, you
need to select either the new printer driveror the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message. If the local
printer driver for Windows 2000/XP is installed beforehand,
you can select the printer driver for Windows 2000/XP as the
current printer driver instead of the alternative driver in the
Windows NT 4.0 server.
❏
If the additional driver for Windows 2000/XP (NT 4.0) is
installed in the Windows 2000/XP/NT 4.0 printer server, go to
the next step.
❏
If the additional driver is not installed in the Windows NT 4.0
printer server or the printer server’s OS is Windows Me/98/95,
go to “Installing the Printer Driver from the CD-ROM” on
page 127.
6. For Windows 2000, select whether to use the printer as the
default printer or not, then click
OK
.
7. Make sure of the settings, then click
Finish
.
With Windows NT 4.0
Follow these steps to set Windows NT 4.0 clients:
To Next Page
Loading...
