82
UsingthePrinterSoftwarewithWindows
Using the Reserve Job Function
The Reserve Job function allows you to store print jobs in the
printer’s Hard Disk Drive and to print them later directly from
the printer’s control panel. Follow the instructions in this section
to use the Reserve Job function.
Note:
You need an optional Hard Disk Drive installed in your printer in order
to use the Reserve Job function. Make sure that the drive is correctly
recognized by the printer driver before you start using the Reserve Job
function.
The table below gives an overview of the Reserve Job options.
Each option is described in detail later in this section.
13. OK button: Clicking this button saves your
settingsandexitsthedialogbox
or printer driver.
14. Cancel button: Clicking this button exits the
dialog box or printer driver
without saving your settings.
15. Help button: Clicking this button opens
online help.
16. Default button: Clicking this button returns the
driver settings to the initial
settings.
Reserve Job Option Description
Re-Print Job Lets you print the job now and store it for later
reprinting.
To Next Page
Loading...
