Epson AcuLaser C8600 - Printing with the Duplex Unit

Using the Printer Software with Macintosh
145
5
5
5
5
5
5
5
5
5
5
5
5
Printing with the Duplex Unit
Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
To use Printing for Binding, the optional Duplex Unit must be
installed and enabled in the printer driver. To enable the Duplex
Unit, select the
AL-C8600
icon and close Chooser. However, the
Duplex Unit is enabled automatically when this unit is installed
and the printer is connected with the computer correctly.
1. Click the Layout icon on the Basic Settings dialog box. The
Layout dialog box appears.
2. Select the
Duplex
check box.
3. Select a Binding position from
Left
,
Top
,or
Right
.
4. Click
Duplex Settings
to open the Duplex Settings dialog box.
5. Specify the Binding Margin for the front and back sides of the
paper.