48
Paper Handling
Note:
❏ You should only use labels designed for laser printers or
plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with
printer parts, always use labels that completely cover the
backing sheet, with no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper
sticks, do not use those labels in your printer.
Thick paper/Extra-thick paper
The following table shows important settings you have to make
when using thick or extra-thick paper:
Loadinganuncommonsizepaper
To load non-standard or custom paper sizes from 90 × 139.7 mm
(3.5 × 5.5 inches) to 328 × 453 mm (12.9 × 17.8 inches), use the MP
tray and make the paper size setting in one of the following ways:
Printer driver settings Paper Size: (Select appropriate size)
Paper Source: MP tray
Paper Type: Thick
Paper Source MP tray only (up to 75 sheets)
MP Tray Size
settinginthe
SelecType Tray Menu
(Select appropriate size)
Printer driver settings Paper Size: (Select appropriate size)
Paper Source: MP tray
Paper Type: Thick, Extra-thick
To Next Page
Loading...
