Epson AcuLaser C8600 - The Message; On the LCD Panel

Troubleshooting
315
10
10
10
10
10
10
10
10
10
10
10
10
The message
Need Momory
appears on the LCD
panel
The message
Print Overrun
appears on the LCD
panel
Cause What to do
The printer has insufficient
memory available for the
current task.
To correct the error, press the
Start/Stop button on the control panel.
You may need to increase the
amount of printer memory.
For more information on adding
memory, see “Memory module” on
page 351.
Cause What to do
The required time to process
theprint dataexceeds theprint
engine speed because the
current page is too complex.
To correct the error, press the
Start/Stop button to resume printing. If
this message appears again, turn on
Page Protect
in the Setup Menu.
If you continue to receive this message
when printing a particular page, try
simplifying the page by limiting the
number of graphics or reducing the
number and size of fonts.
You may need to increase the
amount of printer memory to
avoid getting this error
repeatedly.
For more information on adding
memory, see “Memory module” on
page 351.