Epson AcuLaser C8600 - Operational Problems; The Ready Light Does Not Turn on When You Turn; The Printer on; The Printer Does Not Print and the Ready Light Is off

Troubleshooting
299
10
10
10
10
10
10
10
10
10
10
10
10
Operational problems
The Ready light does not turn on when you turn
the printer on.
The printer does not print and the Ready light is
off
The Ready light is on but nothing prints
Cause What to do
The power cord may not be
properly plugged into the
electrical outlet.
Turn off the printer and check the
power cord connections between the
printer and the electrical outlet. Then
turn the printer back on.
The electrical outlet may be
controlled by an outside
switch or an automatic timer.
Make sure that the switch is turned on
orplug anotherelectricaldevice intothe
outlet to check whether the outlet is
operating properly.
Cause What to do
The printer is offline. Press the Start/Stop button once to
switch the printer to ready status.
Cause What to do