30
Paper Handling
Auto selection
If you select Auto Selection in the printer driver or
Auto
on the
control panel, the paper source that contains paper matching the
page size setting will be used.
When there is no paper in the selected paper source, the printer
will search for a paper source containing the same-size paper in
the following order:
Standard configuration:
MP tray
Lower Cassette 1* (standard lower cassette)
* Refers to the standard lower cassette or the optional 250-Sheet Paper Cassette
A3W, depending on the configuration.
Note:
❏ If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
❏ You can change the priority order through the
MP Mode
setting in
the Tray Menu. For details, see “Tray Menu” on page 177.
With optional paper sources installed:
MP tray
Lower Cassette 1* (standard lower cassette)
Lower Cassette 2** (optional lower cassette)
Lower Cassette 3 ***(optional lower cassette)
* Refers to the standard paper cassette or the optional 250-Sheet Paper Cassette
A3W, depending on the configuration.
** Refers to the optional 500-Sheet Paper Cassette Unit or the optional Large Capacity
Paper Unit, depending on the configuration.
***Refers to the optional Large Capacity Paper Unit.
Note:
❏ If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
To Next Page
Loading...
