Epson DFX-9000 - Page 148

Epson DFX 9000 Revision B
Disassembly and Assembly SENSOR BOARD UNIT 141
3. Pinch the locking tabs on the four L-Cap spacers that secure the
SENSOR BOARD UNIT to the bottom rear of the printer, and
remove the SENSOR BOARD UNIT.
Figure 4-14. SENSOR BOARD UNIT Removal (2)
 Do not install the SENSOR BOARD UNIT upside
down or reversed.
 Be sure all cables are reconnected securely.
Bottom of
the Printer
SENSOR BOARD UNIT
3)-2
3)-1
3)-1
3)-3
L-Cap spacer