Epson DFX-9000 - Page 184

Epson DFX 9000 Revision B
Disassembly and Assembly DV ROLLER UNIT 177
13. Remove the two C.B.S. 3 × 6 screws that secure the Nip bracket unit
to the SIDE FRAME, RIGHT, and remove the Nip bracket unit.
14. Release the two tabs that secure the DV gear R to the right end of the
DV ROLLER R ASY, and remove the DV gear R, spring washer,
and washer.
15. Remove the E-ring that secures the right end of the DV ROLLER F
ASY, and remove the washer and spring washer.
16. Remove OC slide cam R, and remove the OC cam and Bearing FR
from the DV ROLLER F ASY.
Figure 4-56. DV ROLLER F ASY Removal (3)
13)-1
13)-1
DV ROLLER R ASY
Nip bracket unit
DV gear R
Tabs
14)-1
DV ROLLER F ASY
OC cam
Spring Washer
14)-3
E-ring
Washer
14)-4
DV gear R
14)-2
15)-1
Bearing FR
16)-3
OC slide cam R
16)-1
16)-2
Washer
15)-2
Spring washer
15)-3