Epson DFX-9000 - Page 185

Epson DFX 9000 Revision B
Disassembly and Assembly DV ROLLER UNIT 178
17. Remove the two C.B.S. 3 × 6 screws that secure the Lower guide F
ASY to the SIDE FRAME, LEFT / RIGHT.
18. Slide the DV ROLLER ASY to the left until the right side of the
shaft clears the frame, then lift the right side of the shaft upward
through the clearance in the Right side frame shown in Figure 4-58.
Pull the left-side of the shaft out of the Left side frame to remove the
DV ROLLER ASY.
Figure 4-57. DV ROLLER F ASY Removal (4)
Figure 4-58. DV ROLLER F ASY Removal (5)
C H E C K
P O I N T
Remove only the two screws without removing the Lower
guide F ASY.
17)
17)
Lower guide F ASY
Right side Left side
DV ROLLER F ASY
18)-1
18)-2
18)-3