Epson DFX-9000 - Page 190

Epson DFX 9000 Revision B
Disassembly and Assembly DV ROLLER UNIT 183
14. Remove the two C.B.S. 3 × 6 screws that secure the Nip bracket unit
to the SIDE FRAME, RIGHT, and remove the Nip bracket unit.
15. Release the tab that secures the DV gear R to the right end of the DV
ROLLER R ASY, and remove the DV gear R, spring washer, and
washer.
16. Remove the E-ring that secures the right end of the DV ROLLER F
ASY, and remove the washer and spring washer.
17. Remove the OC slide cam R, and remove the Bearing RR from the
DV ROLLER R ASY.
Figure 4-63. DV ROLLER R ASY Removal (4)
14)-1
14)-1
DV ROLLER R ASY
Nip bracket unit
DV gear R
tabs
15)-1
DV ROLLER F ASY
Spring Washer
15)-3
E-ring
Washer
15)-4
DV gear R
15)-2
16)-1
Bearing RR
OC slide cam R
17)-1
Washer
16)-2
Spring washer
16)-3
17)-2