Epson DFX-9000 - Page 192

Epson DFX 9000 Revision B
Disassembly and Assembly DV ROLLER UNIT 185
21. From inside the frame, remove the E-ring that secures the left end of
the OC shaft to the inside of the Upper guide R unit.
22. Remove the right and left E-rings that secure the right and left ends
of the Nip roller shaft to the inside of the Upper guide R unit.
23. Release the tabs (2 places each) that secure the right and left Upper
Guide Springs, and remove both Upper guide springs.
Figure 4-65. DV ROLLER R ASY Removal (6)
Upper guide R unit
Nip roller shaft R
OC shaft
E-ring E-ring
23) Upper guide L spring
Right side
Left side
23) Upper guide R spring
21)
E-ring
22)
22)