Epson DFX-9000 - Page 55

Epson DFX-9000 Revision B
Product Description Operations 48
The SelecType values available are as shown in the table below.
Underlined values are the factory default settings.
Table 1-35. Setting values available in Selectype
Setting Items Setting Values
Language English, Français, Deutsche, Italiano, Español,
Português
Print settings Execute
Pge length rear 3 inches, 3.5 inches, 4 inches, 5.5 inches, 6
inches, 7 inches, 8 inches, 8.5 inches, 11 inches,
70/6 inches, 12 inches, 14 inches, 17 inches,
XX.X inches
1
Pge length front 3 inches, 3.5 inches, 4 inches, 5.5 inches, 6
inches, 7 inches, 8 inches, 8.5 inches, 11 inches,
70/6 inches, 12 inches, 14 inches, 17 inches,
XX.X inches
1
Skip perforation Off, On
Line spacing 1/6 inches, 1/8 inches, XXX/432 inches
1
Left margin 0 to 80 columns
Right margin 1 to 136 columns
Platen gap Auto, 0 to 14 (See Table 1-6)
Auto tear off Off, On
Auto line feed Off, On
Print direction Bi-D, Uni-D
Software ESC/P, IBM PPDS, Others
1
0 slash Off, On
I/F mode Auto
, Parallel, Serial, USB, Optional
I/F wait time 10 seconds, 30 seconds
Parallel Bi-D Off, On
Packet mode Auto, Off
Baud rate 19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS,
1200 BPS, 600 BPS, 300 BPS
Parity None, Odd, Even, Ignore
Data length 8-bit, 7-bit
Character table STD version:
PC437, PC850, PC860, PC863, PC865, PC861,
BRASCII, Abicomp, Roman8, ISO Latin 1,
PC858, ISO 8859-15, Italic U.S.A., Italic France,
Italic Germany, Italic U.K., Italic Denmark, Italic
Sweden 1, Italic Italy, Italic Spain 1
NLSP version:
PC437, PC850, PC860, PC863, PC865, PC861,
BRASCII, Abicomp, Roman8, ISO Latin 1,
PC858, ISO 8859-15, PC437 Greek, PC853,
PC855, PC852, PC857, PC866, PC869,
MAZOWIA, Code MJK, ISO 8859-7, ISO Latin
1T, Bulgaria, PC774, Estonia, ISO 8859-2,
PC866 LAT., PC866 UKR, PC APTEC, PC708,
PC720, PCAR864, PC771, PC437 Slovenia, PC
MC, PC1250, PC1251, Italic U.S.A., Italic
France, Italic Germany, Italic U.K., Italic
Denmark, Italic Sweden 1, Italic Italy, Italic
Spain 1
Auto CR (IBM)
2
Off, On
Table 1-35. Setting values available in Selectype (continued)
Setting Items Setting Values