103
Publishing Discs
EPSON Total Disc Monitor starts, and the disc publishing process begins.
In Batch Mode, if Stacker 2 is taken out during the publishing process, when Stacker 2 is
loaded again, it is always recognized as an input stacker even if it has been switched to
an output stacker. Be sure to take out the published discs from Stacker 2.
• If there are jobs waiting to be processed, the disc publishing process begins in the order
with which jobs were published.
• See “Taking out discs” on page 104 in this guide for the procedure to take out
published discs.
Note
To Next Page
Loading...
