Epson DS-790WN

2.
Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e scanner is updated.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Conguring a Server Certicate for the Scanner
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Certicate.
2.
Specify a certicate to use on Server Certicate.
❏ Self-signed
Certicate
A self-signed
certicate
has been generated by the scanner. If you do not obtain a CA-signed
certicate,
select this.
❏ CA-signed
Certicate
If you obtain and import a CA-signed
certicate
in advance, you can specify this.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e scanner is updated.
Related Information
& “Running Web
Cong
on a Web Browser” on page 34
& “
Conguring
a CA-signed
Certicate
” on page 94
& “Conguring a CA Certicate” on page 98
Advanced Security Settings > SSL/TLS Communication with the Scanner > Conguring a Server Certicate
f
…
100