Epson DS-790WN

4.
Click Export.
c
Important:
If you want to export the scanner’s network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
scanner.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Import the settings
Import the exported Web Cong le to the scanner.
c
Important:
When importing values that include individual information such as a scanner name or IP address, make sure the
same IP address does not exist on the same network.
1.
Access Web
Cong
, and then select the Device Management tab > Export and Import Setting Value >
Import.
2.
Select the exported le, and then enter the encrypted password.
3.
Click Next.
4.
Select the settings that you want to import, and then click Next.
5.
Click OK.
e settings are applied to the scanner.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Restore Default Settings
On the control panel, select Settings > System Administration > Restore Default Settings, and then select the
items you want to restore to their defaults.
❏ Network Settings: Restore network related settings to their initial status.
❏ All Except Network Settings: Restore other settings to their initial status except for network related settings.
❏ All Settings: Restore all settings to their initial status when purchased.
Maintenance > Restore Default Settings
161