Epson DS-790WN

Messages Cause
Sender's Email Address is incorrect.
Change to the email address for your
email service.
This message appears when the specied sender’s Email address is wrong.
Cannot access the product until
processing is complete.
This message appears when the scanner is busy.
Setting a Shared Network Folder
Set a shared network folder to save the scanned image.
When saving a
le
to the folder, the scanner logs on as the user of the computer on which the folder was created.
Creating the Shared Folder
Related Information
& “Before Creating the Shared Folder” on page 43
& “Checking the Network
Prole
” on page 43
& “Location Where the Shared Folder is Created and an Example of the Security” on page 44
& “Adding Group or User Which Permits Access” on page 55
Before Creating the Shared Folder
Before creating the shared folder, check the following.
❏ e scanner is connected to the network where it can access the computer where the shared folder will be
created.
❏ A multi-byte character is not included in the name of the computer where the shared folder will be created.
c
Important:
When a multi-byte character is included in the computer name, saving the
le
to the shared folder may fail.
In that case, change to the computer that does not include the Multi-byte character in the name or change the
computer name.
When changing the computer name, make sure to conrm with the administrator in advance because it may aect
some settings, such as computer management, resource access, etc.
Checking the Network
Prole
On the computer where the shared folder will be created, check whether folder sharing is available.
1.
Log in to the computer where the shared folder will be created by the administrator authority user account.
2.
Select Control Panel > Network and Internet > Network and Sharing Center.
Required Settings for Scanning > Setting a Shared Network Folder > Creating the Shared Folder
43