Epson DS-790WN

Roller Assembly Kit Codes
Parts (the pickup roller and separation roller) should be replaced when the number of scans exceeds the service
number. You can check the latest number of scans on the control panel or in the Epson Scan 2 Utility.
A: pickup roller, B: separation roller
Part name Codes Life cycle
Roller Assembly Kit B12B819671
B12B819681 (India only)
200,000
*
* This number was reached by consecutively scanning using Epson test original papers, and is a guide to the replacement
cycle. The replacement cycle may vary depending on
dierent
paper types, such as paper that generates a lot of paper dust
or paper with a rough surface that may shorten the life cycle.
Resetting the Number of Scans
Reset the number of scans aer replacing the roller assembly kit.
1.
Select Settings > Device Information > Reset the Number of Scans > Number of Scans Aer Replacing
Roller from the home screen.
2.
Tap Ye s .
Related Information
& “Replacing the Roller Assembly Kit” on page 153
Energy Saving
You can save energy by using sleep mode or auto power o mode when no operations are performed by the
scanner. You can set the time period before the scanner enters sleep mode and turns o automatically. Any
increase will aect the product’s energy eciency. Consider the environment before making any changes.
1.
Select Settings on the home screen.
2.
Select Basic Settings.
Maintenance > Energy Saving
158