Epson DS-790WN

Items Settings and Explanation
Encryption Strength You can select one of the followings.
High AES256/3DES
Middle AES256/3DES/AES128/RC4
Conguring
a
Certicate
for IEEE802.1X
Congure the Client Certicate for IEEE802.1X. When you set it, you can use EAP-TLS and PEAP-TLS as an
authentication method of IEEE802.1x. If you want to congure the certication authority certicate, go to CA
Certicate.
1.
Access Web Cong and then select the Network Security tab > IEEE802.1X > Client Certicate.
2.
Enter a certicate in the Client Certicate.
If you have already imported a
certicate
published by a
Certication
Authority, you can copy the
certicate
and use it in IEEE802.1X. To copy, select the certicate from Copy From, and then click Copy.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Solving Problems for Advanced Security
Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering, you may not be able to communicate
with devices because of incorrect settings or trouble with the device or server. In this case, restore the security
settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using Web
Cong
You can disable IPsec/IP Filtering using Web Cong.
1.
Access Web
Cong
and select the Network Security tab > IPsec/IP Filtering > Basic.
2.
Disable the IPsec/IP Filtering.
Advanced Security Settings > Solving Problems for Advanced Security > Restoring the Security Settings
113