Epson DS-790WN

Using Lock Setting for the Control Panel
You can use Lock Setting to lock the control panel to prevent users from changing items related to system settings.
Note:
If you enable Authentication Settings on the scanner, Lock Setting is also enabled for the control panel. e control panel
cannot be unlocked when Authentication Settings is enabled.
Even if you disable Authentication Settings, Lock Setting remains enabled. If you want to disable it, you can make settings
from the control panel or Web
Cong
.
Setting Lock Setting from the Control Panel
1.
If you want to cancel the Lock Setting once it has been enabled, tap
at the top right corner of the Home
screen to log in as an administrator.
is not displayed when Lock Setting is disabled. If you want to enable this setting, go to the next step.
2.
Select Settings.
3.
Select System Administration > Admin Settings.
4.
Select On or O as the Lock Setting.
Setting Lock Setting from Web Cong
1.
Select the Device Management tab > Control Panel.
2.
Select ON or OFF for Panel Lock.
3.
Click OK.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Lock Setting items on the Settings Menu
is
is a list of items that are locked in the Settings menu on the control panel by Lock Setting.
✓: To be locked.
- : Not to be locked.
Settings menu Lock Setting
Basic Settings -
Basic Security Settings > Administrator Settings > Using Lock Setting for the Control Panel
82