Settings menu Lock Setting
Serial Number -
Current Version -
Total Number of Scans -
Number of 1-Sided Scans -
Number of 2-Sided Scans -
Number of Scans of Carrier Sheet -
Number of Scans After Replacing Roller -
Number of Scans After Regular Cleaning -
Reset the Number of Scans ✓
Scanner Maintenance -
Roller Cleaning -
Roller Replacement -
Reset the Number of Scans ✓
How to Replace -
Regular Cleaning -
Reset the Number of Scans ✓
How to Clean -
Glass Cleaning -
Roller Replacement Alert Setting ✓
Count Alert Setting ✓
Regular Cleaning Alert Settings ✓
Warning Alert Setting ✓
Count Alert Setting ✓
* You can set whether or not to allow changes in System Administration > Restrictions.
Logging in as an Administrator from the Control Panel
You can use any of the following methods to log in as an administrator from the scanner's control panel.
1.
Tap at the top right of the screen.
❏ When Authentication Settings is enabled, the icon is displayed on the Welc om e screen (the authentication
standby screen).
❏ When Authentication Settings is disabled, the icon is displayed on the Home screen.
Basic Security Settings
>
Administrator Settings
>
Logging in as an Administrator from the Control Panel
85
To Next Page
Loading...
