Epson DS-790WN

Item Explanation
Authentication
Method
Select the Authentication Method.
❏ Local DB
Authenticate using the User Settings registered to the scanner. It is necessary to register the
user to the scanner.
❏ LDAP
Authenticate using the user information on the LDAP server synchronized with the scanner.
You need to congure the LDAP server settings beforehand.
❏ Local DB and LDAP
Authenticate using the user information registered to the scanner or the LDAP server
synchronized with the scanner. You need to register the user to the scanner and set up the
LDAP server.
How to Authenticate
User
Select how to authenticate a user.
❏ Card or User ID and Password
Use an authenticate card to authenticate users. You can also use a user ID and password to
authenticate.
❏ User ID and Password
Use a user ID and password to authenticate users.
You cannot use an authenticate card to authenticate when you select this function.
❏ User ID
Use only a user ID to authenticate users. You do not need to set a password.
❏ Card or ID Number
Use an authenticate card to authenticate users. You can also use an ID Number.
❏ ID Number
Use only an ID Number to authenticate users.
Allow users to register
authentication cards
Enable it if you allow users to register the authentication card to the system.
If you select LDAP for Authentication Method, you cannot set it.
For more information on how users can register their authentication cards, see "Registering an
Authentication Card" in the User's Guide.
The Minimum Digit
Number of ID Number
Select the minimum number of digits for the ID number.
Caching for LDAP
authenticated users
When using LDAP server authentication, you can set whether or not to use caching for user
information.
Use user information
in SMTP
authentication
When using a user ID and password for authentication, you can set whether or not to use user
information for SMTP authentication. The system uses the last user ID and password that were
logged in.
Restrictions for LDAP
authenticated users
If you are using LDAP, you can set the functions that are available to the user.
Registering User Settings
Register the User Settings used for user authentication. You can register using any of the following methods.
❏ Registering User Settings One by One (Web Cong)
Authentication Settings > Registering and Setting Information > Registering User Settings
131