Deleting Authentication Settings Information
(Restore Default Settings)
To delete all Authentication Settings information (Card Reader, Authentication Method, User Settings, and so on),
restore all of the scanner settings to the default settings at the time of purchase.
Select Settings > System Administration > Restore Default Settings > All Settings on the control panel.
c
Important:
All contacts and other network settings will also be deleted. Deleted settings cannot be restored.
Solving Problems
Cannot Read the Authentication Card
Check the following.
❏ Check if the authentication device is connected to the scanner correctly.
Connect the authentication device to the external interface USB port on the back of the scanner.
❏ Check that the authentication device and the authentication card are supported.
Authentication Settings
>
Solving Problems
>
Cannot Read the Authentication Card
146
To Next Page
Loading...
