3.
Enter the email address for sending the
notication
email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
4.
Select the language for the email notications.
5.
Select the check box on the event for which you want to receive a notication.
e number of Notication Settings is linked to the destination number of Email Address Settings.
Example :
If you want to send a notication to the email address set for number 1 in Email Address Settings when the
admin password is changed, select the check box for column 1 on the line Administrator password changed.
6.
Click OK.
Conrm that an email notication will be sent by causing an event.
Example :
e
administrator password has been changed.
Related Information
& “Running Web Cong on a Web Browser” on page 34
Items for Email Notication
Items Settings and Explanation
Administrator password changed Notice when administrator password has been changed.
Scanner error Notice when the scanner error has occurred.
Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.
Solving Problems
Forgot Your Administrator's Password
You need help from service personnel. Contact your local dealer.
Note:
e following provides the initial values for the Web Cong administrator.
❏ User name: none (blank)
❏ Password: serial number of the scanner
To nd the serial number, check the label attached to the rear of the scanner. If you restore the default settings for the
administrator password, it is reset to the initial values.
Basic Security Settings
>
Solving Problems
>
Forgot Your Administrator's Password
88