Epson DS-790WN

Logging in as an Administrator from the Control Panel
You can use any of the following methods to log in as an administrator from the scanner's control panel.
1.
Tap at the top right of the screen.
❏ When Authentication Settings is enabled, the icon is displayed on the Welc om e screen (the authentication
standby screen).
❏ When Authentication Settings is disabled, the icon is displayed on the Home screen.
2.
Tap Ye s when the
conrmation
screen is displayed.
3.
Enter the administrator's password.
A login complete message is displayed, and then the Home screen on the control panel is displayed.
To logout, tap
at the top right of the Home screen.
Disabling Authentication Settings
You can disable Authentication Settings using Web
Cong
.
Note:
e User Settings registered to the scanner will be saved even if Authentication Settings is disabled. You can remove them by
restoring the scanner to its default settings.
1.
Access Web Cong.
2.
Select the Product Security tab > Basic > Authentication.
3.
Select OFF.
4.
Click Next.
5.
Click OK.
Note:
Even if you disable Authentication Settings, Lock Setting remains enabled. If you want to disable it, you can make settings
from the control panel or Web Cong.
Related Information
& “Setting Lock Setting from the Control Panel” on page 82
& “Setting Lock Setting from Web Cong” on page 82
Authentication Settings > Disabling Authentication Settings
145