Epson DS-790WN

1.
Open the scanner list on the computer.
❏ Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
2.
Right-click on your scanner and select Properties.
3.
Select the Web Ser vice tab and click the URL.
Since the scanner uses a self-signed
certicate
when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Note:
❏ e following provides the initial values for the Web Cong administrator information.
·User name: none (blank)
·Password: serial number of the scanner
To nd the serial number, check the label attached to the rear of the scanner.
❏ If Log out is displayed at the top-right of the screen, you have already logged-on as an administrator.
Epson Device Admin
Epson Device Admin is a multifunctional application that allows you to manage devices on a network.
You can use conguration templates to apply unied settings to multiple scanners on a network, making it suitable
for installing and managing multiple scanners.
You can download Epson Device Admin from the Epson support website. For details on how to use this
application, see the documentation or help for Epson Device Admin.
Conguration
Template
Creating the Conguration Template
Create the conguration template newly.
1.
Start Epson Device Admin.
Software for Setting Up the Scanner > Epson Device Admin > Conguration Template
35